Dented or cracked panels
Garage Door Panel Replacement: One Panel or a New Door?
Free matching service for homeowners · We connect you with independent, licensed local garage door companies · We don't do the work ourselves
Garage door panel replacement in the Phoenix area runs about $260 to $900 for one panel, per Angi's Phoenix guide. Angi's rule of thumb: if more than two panels need replacing, ask whether a whole new door is the better value. Below, we cover how to decide, how to match an older door and HOA colors, and what drives the price. We'll match you with up to 5 licensed, insured local companies, free.
- Phoenix panel costs from Angi
- One panel vs. a new door, explained
- Matching older doors and HOA colors
- Free match, no obligation
- 1Tell us what you need. Answer a few quick questions. It takes about 30 seconds.
- 2Get matched. We share your request with up to 5 licensed, insured local garage door companies.
- 3Compare and decide. Compare quotes from the companies that reach out and decide what's right for you. No obligation.
Replace one panel or the whole garage door?
Replace a single panel when the damage is limited to one or two sections, the rest of the door is sound, and a matching panel is still available. Look at a new door when more than two panels are damaged, the door is old and needs other major parts, or you can't get a panel that matches.
| Damage | Typical range | Source |
|---|---|---|
| One panel (Phoenix) | $260 to $900 | Angi, 2026 |
| Two panels (Phoenix) | $520 to $1,800 | Angi, 2026 |
| Three panels (Phoenix) | $780 to $2,700 | Angi, 2026 |
| New door, installed (U.S.) | $1,500 to $6,000, average about $2,500 | Bob Vila |
Typical published ranges. Your matched companies quote the actual price after seeing the door.
The table shows why Angi draws the line at two panels. By the third, the panel bill overlaps the low end of a new installed door, and a new door also brings new tracks, rollers and often better insulation. Angi's Phoenix guide puts the average single panel at about $568, with most homeowners paying $362 to $930.
Leaning toward a new door? See new garage door installation for materials, insulation and installed costs.
Signs a garage door panel needs replacing
- A dent or crease deep enough to rub on the track or stop the door from sealing
- A crack or split in a steel, wood or composite section
- Rust that has eaten through the skin of a steel panel
- A bowed or warped section that makes the door bind
- Broken hinge or roller mounting points on one section
Small dents may not need a new panel at all. HomeAdvisor says a professional typically charges $100 to $300 to pull or fill a dent. For deeper damage, HomeServe says replacing a damaged panel is usually better than repairing it.
If the panel damage came from an impact that also bent a track or knocked rollers loose, stop using the door. See garage door off track repair before running it again.
Matching a new panel to your existing door
A new panel has to fit the door's make, model, size and design, and it should look like the sections around it. Matching is often the deciding factor between one panel and a new door.
Discontinued panels
Panels are made to fit a specific door line. If your door is older, the maker may no longer produce that exact section, or the style may have changed. Before you approve a panel quote, ask the company whether it has confirmed an exact match from the manufacturer, or whether it's offering the closest available style. If no match exists, a new door may be the only clean fix.
Sun-faded color
Even a perfect match can look off next to sections that have sat in the Arizona sun for years. Angi's Phoenix guide notes that long sun exposure bleaches panels, so many homeowners paint the whole door so new and old sections match. Angi lists exterior painting at about $1 to $10 per square foot.
HOA color and style rules
Many Phoenix-area communities, especially newer master-planned ones, have HOA rules on garage door color and style. A single matching panel usually keeps you within those rules, but repainting the door or switching to a new design may need approval. Check your HOA guidelines before work is scheduled, and ask the company for a product sheet or color name you can submit.
Dented panel and not sure it can be matched? Get matched with licensed local pros who can check.
Get Help NowGarage door panel replacement cost
In Phoenix, one panel typically runs $260 to $900, per Angi. Door style, material, labor time and any related repairs drive the final price.
| Item | Typical range | Source |
|---|---|---|
| Sectional door, one panel (Phoenix) | $260 to $515 | Angi, 2026 |
| Panel only, materials (Phoenix) | $155 to $825 | Angi, 2026 |
| Labor (Phoenix) | $75 to $150 per hour, about 1 to 3 hours for one panel | Angi, 2026 |
| Panel replacement (U.S.) | $250 to $1,000 | HomeAdvisor, 2026 |
| Replacement panel (U.S.) | $300 to $900 | HomeServe, 2025 |
| Disassemble, replace panel, reassemble (U.S.) | About $860 | HomeServe, 2025 |
| Dent pulled or filled (U.S.) | $100 to $300 | HomeAdvisor, 2026 |
Angi notes that tilt-up (one-piece) doors are the most expensive to repair, because the whole door has to be replaced.
Angi also notes that panel replacements in Phoenix often come with other repairs, which raise the total. An impact that dents a panel can also bend a track or strain a cable. If a cable came loose, see garage door cable repair. For every job type side by side, see the garage door repair cost guide.
Does insurance cover a damaged garage door panel?
It depends on your policy and what caused the damage. Impact or storm damage is more likely to be covered than wear. Call your insurer before filing, and ask the garage door company for an itemized written estimate that separates the panel, labor and any related parts.
Getting a panel replacement quote
- Photograph the whole door and the damaged section, plus any label with the maker or model.
- Count the damaged panels and note whether the door still runs smoothly.
- Ask whether the quote is for an exact manufacturer match or the closest available style.
- Ask for a new-door price too if more than two panels are damaged.
- Get the price in writing before work begins.
We only send requests to companies that give us an active Arizona ROC license number and proof of liability insurance. The ROC says a license is generally required when labor and materials exceed $1,000, which multi-panel jobs can reach. We match homeowners across the Valley, including Chandler and Scottsdale.
How we researched this: costs come from Angi's Phoenix panel guide, HomeAdvisor, HomeServe and Bob Vila, linked below. We don't add our own estimates. Read how we research our guides.
Related garage door services
Garage door panel replacement FAQs
How much does it cost to replace one garage door panel in Phoenix?
Angi's Phoenix guide lists one panel at about $260 to $900, with an average around $568. For a standard sectional door, Angi's range is narrower, about $260 to $515. Labor runs about $75 to $150 per hour, and Angi says a single panel takes one to three hours if nothing else needs fixing.
How many damaged panels before I should replace the whole door?
Angi suggests asking about a full replacement once more than two panels need replacing. Three Phoenix panels run about $780 to $2,700 per Angi, which overlaps the $1,500 to $6,000 range Bob Vila gives for a new installed door. A new door also replaces worn tracks and rollers, which a panel swap doesn't.
What if my garage door panel is discontinued?
Ask the company to check with the door's manufacturer using the model or label on the door. If the exact section isn't made anymore, you may be offered a close style, which can look mismatched. In that case, compare the panel quote with a new-door quote before deciding, especially if your HOA requires a uniform look.
Will a new panel match my faded garage door?
Maybe not at first. Angi notes that strong sunlight bleaches garage door panels over time, so a brand-new section can stand out against older ones. Many homeowners paint the whole door so it matches. Angi lists exterior painting at about $1 to $10 per square foot. Check HOA color rules before repainting.
Can a dented garage door panel be repaired instead of replaced?
Small, shallow dents often can. HomeAdvisor says a pro typically charges $100 to $300 to pull or fill a dent. Creases, cracks or damage near hinges usually weaken the section, and HomeServe says replacing a damaged panel is usually the better choice. Ask the tech whether the dent affects how the door rolls or seals.
Can I keep using my garage door with a damaged panel?
If the door still opens and closes smoothly and the damage is cosmetic, usually yes until the repair. If the dent rubs the track, a roller popped out, or the door binds or looks crooked, stop using it. DASMA says a door that doesn't move smoothly may be an unsafe condition.
Phoenix-area cities we serve
Ready to get started?
Tell us what you need, and we'll share your request with up to 5 licensed local garage door companies that serve your area. Free, with no obligation.
Get Help NowSources
- Angi: Garage door panel replacement cost in Phoenix, AZ (updated July 2026)
- HomeAdvisor: Garage door repair cost (updated June 2026)
- HomeServe: Garage door repair cost guide (November 2025)
- Bob Vila: Garage door replacement cost
- DASMA: Garage door safety tips
- Arizona Registrar of Contractors: License classifications
Last updated October 2026.